3 Phase Rectifier
- Product Type Bridge Rectifier
- Application electroplating
- Input Voltage 340,380,415;440;480 Volt (V)
- Output Current 3000 Ampere (amp)
- Output Voltage 15 Volt (V)
- Modular Modular
- Interface Type RS485,0-10V;4-20ma
- Supply Ability : 200 Set Per Month
- Click to view more
Price And Quantity
- 2980.00 - 3992.00 USD ($)/Set
- 1 Set
- 3000 Ampere (amp)
- 340,380,415;440;480 Volt (V)
- 15 Volt (V)
- Bridge Rectifier
- 1 year
- Paypal, Western Union, Telegraphic Transfer (T/T), Letter of Credit at Sight (Sight L/C), Letter of Credit (L/C)
- 200 Set Per Month
- 6-8 Week
- Contact us for information regarding our sample policy
- Polywood package
- Africa, Western Europe, South America, North America, Asia
modulation technology. It is modular structure design, easy to expand output current capacity, several rectifier modules could be connected in parallel and mounted in stack up to 20 modules to make more current single rectifier. has independent power modules, each module could output independently or output in parallel connection
The rectifier is made up with the following sub assemblies:
- Diode bridge
- IGBT inverter H bridge
- High frequency transformer
- Secondary Schottky diodes
- Capacitors and inductors
- Control and protection circuit and devices
- Cooling circuit
- Remote control box(optional)
- Power requirement: AC 380V+/-10%, three phase, and meet national electricity quality standard.
- Used indoors, ambient temperature: 0~+40
- Relative humidity: 90% (relative to 20±50).
- Elevation: less than 2,000 meters.
- There should be excessive amount of dust, explosive and corrosive gas in the air.
- The installation place should be without severe vibration, the vertical gradient shouldn exceed 5%.
- The seismic intensity of the installation site is less than 7 on the Richter scale.
- Saturated vapor pressure: daily average value is less than 2.2-10-3M pa, monthly average value is less than 1.8 -10-3Mpa.
High quality components
- Control board: DSP digital control, 20+ years high control accuracy, not like analog control, accuracy will reduce after some time.
- Cabinet: use 2mm thick strong cold-rolled steel plate or aluminum coated zinc plate.
- High frequency transformer: use Nanocrystalline material as core, it is high efficiency saving power, long time reliable running.
- Bus bar: use red copper bus bar, the purity of copper is 99.9%, not like others may use brass or aluminum inside.
- Cooling fan: use Taiwan or Japan brand high quality fan, with lifespan 100,000 hours under 25.
- Touch panel: control and display all parameters on one panel for local use or remote monitor, say goodbye to separate controls. easy for troubleshooting, while there is protection, it will show protection type automatically.
- Capacitor: Taiwan brand reliable Film Capacitors.
- IGBT: Germany or Japan brand.
- SMPS: use Taiwan brand MEANWELL.
- Rectifier diode module: China best quality brand, some other supplier use other lower quality brand.
- Current sensor: China best quality brand.
- Cables, wires, screws: use best quality
- Touch panel HMI: Fault self diagnose and display,easy troubleshooting
- DSP control :High control accuracy, high stability ong time reliable
- Easy remote control:Easy communication with PLC: RS485 MODBUS, DP-Profibus, Profinet, RS232, 0-10V/4-10mA analog signal