12V Water Cooled Electroplating Power Supply

12V Water Cooled Electroplating Power Supply
12V Water Cooled Electroplating Power Supply
Send Inquiry
Product Code : 26
Brand Name : Green Power
Price And Quantity
  • Minimum Order Quantity
  • 3 Set
  • Price
  • 800 USD ($)/Sheet
Product Specifications
  • Working Temperature
  • 45 Celsius (oC)
  • Application
  • electroplating
  • Output Type
  • Single
  • Phase
  • Single Phase
  • Output Current
  • 100 Ampere (amp)
  • Product Type
  • bridge rectifier
  • Input Voltage
  • 415 Volt (V)
  • Efficiency
  • 90%
  • Storage Temperature
  • 35 Celsius (oC)
  • Weight
  • 46 Kilograms (kg)
Product Description

The powerful model is designed for the harshest environments. It combines the compact design and easy access advantages of a cabinet construction with the almost completely sealed enclosure of tank design. Due to its higher cooling efficiency of water in comparison to air, this power supply is even more compact than air-cooled systems.

Application of 12V Water Cooled Electroplating Power Supply

This rectifier is used for 12V water cooled electroplating power supply of 1000A, 2000A, and 3000A. Also, it is suitable for electrochemistry process, such as electrolysis, electroplating, anodizing, electro winning, electro refining, etc and provides a stable DC power supply.

Technical Specification

Data Item


Rectifier type

IGBT high frequency rectifier, modular structure, easy for maintenance

Rated Output: DC

1000A 2000A 3000A 12V

Input voltage

380V AC +-10% 3 phase 4line, 50Hz

Mechanical type

Modular Design

Output regulation range


Control mode

Constant current/constant voltage selectable





Working mode

100% 24 hours continuous running

Alarm type

Audible and visual alarm

Corrosion coating.

For Enclosure and main circuit board components

Power recovery

Yes. After power resuming the power supply to the rectifier,
rectifier could switch on immediately and start rising up to set current.

Power factor




IP degree


Insulation grade: B

B means allowed temperature rise than ambient temperature is 130℃)

Remote control

RS485, Profibus, Profinet, 0-10V, 4-20mA Optional


Advantages of 12V Water Cooled Electroplating Power Supply

  • Modular design
  • Upgradable output current
  • Power saving (high efficiency≥90%)
  • Low ripple at all output current
  • Space-saving
  • Easy service
  • Reliable quality
  • Special treatment in corrosive factory
  • Digital control, software programming
  • High stability to load variation
  • Long time high control accuracy (≤0.5%)
  • RS485 communication included
  • Ampere-hour for dosing system control
  • Timer function for automatic running
  • Resolution 0.1A
  • Accurate output value setting
  • Process program available
  • Rectifier protection stops delay time setting available
  • Multiple remote control communication optional: Profibus, Profinet, analog signal 4-20mA, 0-10V
  • Touch panel or digital meter, buttons control optional
  • Touch panel operation password protection available
  • Technical support and service
  • Spare parts available
  • Software upgrading


Cooling water requirement:




Water quality

PH:68, resistivity ≥20KΩcm, hardness<8 pH

Water is not corrosive, dirty or contains acids.

Inlet Water Temperature


To prevent condensation, the water must not be too cold. The ideal temperature is between ambient temperature and 35℃(not below dew point)

Inlet Water Pressure


Water flow

For 18 no. Of 20000A 12V rectifier>1800L/Min. (recommended)

For 18 no. Of 20000A 12V rectifier>1080L/Min. (lowest)

For 1 no. Of 20000A 12V rectifier>100L/Min. (recommended)

For 1 no. Of 20000A 12V rectifier>60L/Min. (lowest)

  • Whole rectifier and the components are properly tested and inspected, report is available
  • Quality management follows ISO9001:2015


For safety, provide below protections:

Protection type

Protection value

Rectifier action

Over/under input voltage protection


Alarm Rectifier stop

Driving protection


Alarm, rectifier stop immediately

Over heat protection


Alarm Rectifier stop

Over current protection

Rated output current+100A

Alarm Rectifier stop

Over voltage protection

Rated output voltage+2V

Alarm Rectifier stop

Water pressure protection

Alarm Rectifier stop

Trade Information
  • FOB Port
  • Shanghai,Tianjing,Beijing,Guangzhou
  • Supply Ability
  • 600 Set Per Month
  • Delivery Time
  • 6-8 Week
  • Sample Policy
  • Contact us for information regarding our sample policy
  • Packaging Details
  • Polywood package
  • Certifications
  • CE


GREEN POWER CO. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.